me9.6 sensors

[herraihme]

can anybody tell me why i cannot see o2 sensors nor injectors info in opelscannercan?

vectra 07 bosh me9.6 ecu.

[Artur]

What do you mean by "injectors"?

[herraihme]

injectors open time and duty cycles.

[Artur]

I will check and let you know, what parameters can be added to this ECU.

[herraihme]

thanx will be wayting

[herraihme]

notoced few other missing things.
both fuel trims missing (short and long term)
 both o2 sensors missing
boost sensor does not work (allways at 0)
timing adwances missing

and fuel injectors open times and duty cycle

those should not be hard to add. maby can added to opelscanner ability to add custom pids? then everything would be fine.

[Artur]

On this ECU it is not really easy to add live data. I will do my best.

[herraihme]

maybe some pids will help you?
fuel trim long term [07]
fuel trim short term [06]

Those are basic obd as

engine RPM [0C]


harder ones in different modes
injectors pulse with can be founded at [221193] and duty cycle can be calculated from it

edit and sorry my english is not as good as it should be

[Artur]

I need to take a look. Write me on my e-mail, what else do you know about this ECU.

[Artur]

I took a llok in the Tech2 on ME96 - there is no Injector Pulse among parameters.

[herraihme]

I took a llok in the Tech2 on ME96 - there is no Injector Pulse among parameters.

it seems that opel has messed up again. it should be found at gm standard location but ok. But fueltrims and o2 sensors are there both i have read in raw from obd they are in standard locations. Can yoy add them in opelscanner?

[Artur]

Can you give me their PIDs?

[herraihme]

Short term fueltrim : Mode 1, pid 06, formula (A-128) * 100/128, units %
Long term fueltrim : Mode 1, pid 07, formula (A-128) * 100/128, units %
Timing Advance: Mode 1, pid 0E, formula A/2 - 64, units degree
O2 dont rememember have to check when have time

[herraihme]

Here what i have managed to get to work.
absolute throtle position [47]
accelerator pedal position [49]
measured AFR [ff1249]
outside temp [46]
outside barometric pressure [33]
turbo boost [e04fb2]
catalyst temp [3c]
engine coolant temp [05]
fuel level [2f]
fuel pressure [0a]
fuel trim long term [07]
fuel trim short term [06]
inteke air temp [0f]
MAF flow [10]
first o2 sensor (used for fuel adjustment) [34]
second o2 sensor (used for emission checks) [ff1215]

Does those help a bit?