OpelScanner

Ремонт и диагностика авто => [english]ECU dumps[/english][russian]Прошивки различных ЭБУ[/russian] => [english]MID/TID dumps[/english][russian]Прошивки дисплеев MID/TID[/russian] => Topic started by: mandax on April 21, 2011, 02:44:31

Title: I NEED DUMP MID VECTRAB
Post by: mandax on April 21, 2011, 02:44:31
Hello!
I need a dump in km/liters for mid opel vectra b .My mid is in miles .
Thank's in advance!
Title: Re: I NEED DUMP MID VECTRAB
Post by: turboomega on April 28, 2011, 12:41:02
hi
Title: Re: I NEED DUMP MID VECTRAB
Post by: imodulos on July 26, 2013, 13:32:19
I need it too
Title: Re: I NEED DUMP MID VECTRAB
Post by: Dan86 on August 31, 2013, 07:41:58
vb_26pin_x18xe_009_4_15434_90464728_mid99r

http://przeklej.net/file_details/128569.html (http://przeklej.net/file_details/128569.html)

and modified for wheels r16

vb_26pin_x18xe_009_4_14972_90464728_mid99r

http://przeklej.net/down/15334925971400680226395526293989745c045dbb193630f75755983.html (http://przeklej.net/down/15334925971400680226395526293989745c045dbb193630f75755983.html)
Title: Re: I NEED DUMP MID VECTRAB
Post by: jggoauie on May 23, 2014, 16:38:29
Hi. The dump link is not working. :-( Any chance of getting the EEPROM location and meaning? (Change what byte at what address?)
Title: Re: I NEED DUMP MID VECTRAB
Post by: IceHeart on November 02, 2014, 09:20:09
Мне нужен дамп для MID opel vectra b  z16xe
Title: Re: I NEED DUMP MID VECTRAB
Post by: artema on November 02, 2014, 17:27:22
на
Title: Re: I NEED DUMP MID VECTRAB
Post by: sandu on July 30, 2015, 17:31:42
Hi,

does anyone have a dump for Z18XE? As far as I know, the code should be 027.
Title: Re: I NEED DUMP MID VECTRAB
Post by: moreanu on February 29, 2016, 10:35:26
Did you found the needed dump?
Title: Re: I NEED DUMP MID VECTRAB
Post by: moreanu on February 29, 2016, 10:38:28
I also need a dump for x20dth
Title: Re: I NEED DUMP MID VECTRAB
Post by: ivanovici on March 02, 2016, 06:21:50
Мне нужен дамп для MID opel vectra b 1997 x18xe 5wk7 446  26pin english
Title: Re: I NEED DUMP MID VECTRAB
Post by: Targitai on May 11, 2016, 07:20:16
Выложите кто-нибудь на файлообменник прошивку под MID (32 pin) Vectra B x16xel, с индексом 029, пожалуйста. А то у нас Tech2 днем с огнем не отыщешь.
Заранее спасибо.
Title: Re: I NEED DUMP MID VECTRAB
Post by: Targitai on May 11, 2016, 07:23:06
Зачем сделали ограничение? Простите, ребята :(
Title: Re: I NEED DUMP MID VECTRAB
Post by: svitle on October 03, 2016, 02:33:08
Здравствуйте!(I NEED DUMP MID VECTRAB) Нужен дамп для MID (32pin) серый разьем для x16xel 96г.в. механика, 195\65\r15, а именно код прошивки 003.
Title: Re: I NEED DUMP MID VECTRAB
Post by: Gutman on February 19, 2019, 08:07:35
Ребят, разыскиваю дамп МИДа с желтым разъёмом 003
Title: Re: I NEED DUMP MID VECTRAB
Post by: Zippelt on December 23, 2019, 11:10:32
Добрый вечер, из-за чего может не становиться дамп?
Дамп ровный, на другие бк ставиться