OpelScanner

OpelScanner => OpelScannerCAN => Topic started by: wombi on July 13, 2013, 04:12:00

Title: Opel Corsa D 1,3 Multijet DPF
Post by: wombi on July 13, 2013, 04:12:00

Hello
I have an Opel Corsa, Year 2013 9865 km run
Engine number is 13DTC4935521. 1.3 Multijet
Which is equipped with a diesel particulate filter DPF

This diesel particulate filter must be regenerated necessarily. (Burn-off)
The vehicle does not pull to more filters.
  Stops during the trip.

How is this possible with the program?

 Has this before a run?

Asking for a detailed description.

OpelScannerCan is available.

regards
Wombi

Title: Re: Opel Corsa D 1,3 Multijet DPF
Post by: Artur on July 13, 2013, 07:24:24

Hi,

right now DPF regeneration procedure is not available with our software.

Title: Re: Opel Corsa D 1,3 Multijet DPF
Post by: Lechus on July 14, 2013, 14:44:36

repair and off

Title: Re: Opel Corsa D 1,3 Multijet DPF
Post by: wombi on July 15, 2013, 02:57:00

Yes, first thanks for the reply.
The problem is, there are several vehicles that are only used in short-distance transport and the filter does not regenerate itself.

In the said vehicle were just 9865km

The Opel dealer it was regenerated.

I also use the program to scan multi EUR Fiat Group.
At the same Fiat engine is indeed installed.
  In this program, a regeneration of the DPF is available.
(unfortunately I can not connect with this program for the Opel)

Question?
If the inserted also in the near future at the OpelScannerCan?
If so.
  Approximately when?

greeting

Wombi