OpelScanner
OpelScanner => OpelScannerCAN => Topic started by: Pollak on June 07, 2011, 09:43:23
-
Hello,
I use the OpelScannerCan Version 2.0.1.20 and it works fine with my Opel Zafira A and Astra H.
My Problem is, when I will scan the ECU's automaticly from my Insignia 11/2009, the Scanner find no ECU and when I select an ECU manually, i'm only get Information for ECU Info (F2) and Errorcodes (F3), but no Information about Parameters (F4), Grafic (F5) or Special (F6). This Points are all empty.
Can everbody help me, what can I do?
Greetings
Hans-Georg
Sorry for by bad englisch.
-
Hello,
Insignia is under development. Can you send me on info@opel-scanner.com all log files, made on Insignia?
Thanks,
Artur
-
Hello, I have exactly the same problem. The car is a 2009 Insignia, engine A20DTH. OpelScannerCan Version 2.0.1.30. In addition, there is no communication when the engine is turned off and ignition on.
Best regards
Bartek
-
Hello, I have exactly the same problem. The car is a 2009 Insignia, engine A20DTH. OpelScannerCan Version 2.0.1.30. In addition, there is no communication when the engine is turned off and ignition on.
Best regards
Bartek
Hello Bartek,
Please send all logs, as well as when engine is off.
-
How get log list from opelscanner 2.0.1.30?
I have from viaken (Poland) and I have exactly the same problem, too.
Astaj J 2013 A20DTH MY2014 AT AF40-6.
OpelScanner 2.0.1.30 registered.
-
How get log list from opelscanner 2.0.1.30?
I have from viaken (Poland) and I have exactly the same problem, too.
Astaj J 2013 A20DTH MY2014 AT AF40-6.
OpelScanner 2.0.1.30 registered.
Please write on info@opel-scanner.com all details of the problem.