Welcome Guest. Please login or register.

Author Topic: egr valve  (Read 10480 times)

0 Members and 1 Guest are viewing this topic.

Offline s.thompson16

  • Steve
  • Jr. Member
  • **
  • Posts: 14
egr valve
« on: October 12, 2008, 18:45:32 »
Just replaced an egr valve that was stuck open on a corsa c z12xe. Cleared all faults and road tested after 5 minutes driving warning light came on with fault code p1405 unknown fault. Has anyone come across this problem.


Offline Treig

  • AdvancedUser
  • ***
  • Posts: 791
Re: egr valve
« Reply #1 on: October 13, 2008, 00:19:50 »
This is still EGR valve error. It has 3 different variants, one of this is malfunction of EGR evalueted via internal ECU logic.
What was previous errors in system?  You need to take a look at data voltage feedback for EGR valve. Or you can use a test for valve using additional procedures.

Offline s.thompson16

  • Steve
  • Jr. Member
  • **
  • Posts: 14
Re: egr valve
« Reply #2 on: October 13, 2008, 02:10:33 »
Previous faults were egr valve error and random multiple missfire detected. Old egr valve return was stuck at about 3.60 volts. after replacement it now varies between 0.70 - 3.60 volts.

Offline asm

  • Astra-H
  • Jr. Member
  • **
  • Posts: 6
Re: egr valve
« Reply #3 on: April 08, 2012, 15:49:28 »
actually is better to disable EGR

Offline Treig

  • AdvancedUser
  • ***
  • Posts: 791
Re: egr valve
« Reply #4 on: April 08, 2012, 16:26:33 »
ASM once again, correct your profile. Also the good way is to take a look at the date of last post. You are trying to help after almost 4 years since the question was resolved.