OpelScanner > OpelScanner
problem with c20let eds
(1/1)
mic43:
hello all
here is my problem and sorry for my english
i can't work with the opel scanner on my calibra phase 4 and the same problem with an other one eds 2 when the engine is on
but work fine when the engine is not running
work nice in an original set up
have you got a solution ?
thanks
Makkenek:
Hi. Hmm, don't know what I wrote, but if the problem is in the connection of the scanner with the engine running, start with checking the high-voltage part of the car.
mic43:
work fine with standard eprom ;)
Topbuzz:
i've got opel-scanner to work fine on my Calibra c20let using EDS Phase2 chips. You do need the ECU in a certain mode, ie either powered on but engine off or powered on with engine running - I can't remember the combination otherwise.
There was known problem but that got fixed after 2.0.1.29
http://www.vauxhalltrader.co.uk/blog/archives/04-2014
Navigation
[0] Message Index
Go to full version