OpelScanner

ScanMyOpel => ScanMyOpel Android app => Topic started by: TheDane on February 20, 2014, 15:12:29

Title: No response from ECU *error?*
Post by: TheDane on February 20, 2014, 15:12:29
Hi there mate/mates,

I just received my ELM 327 BT adapter, and tried to hook it up to my '99 Corsa B 1.4 16v.

I'm using my Samsung galaxy S1 with Android 4.2.2 software.

I can connect to the BT adapter, but when I try to go to fault codes, or livedata, I get the "no response from ECU"-error.

Could this be because I need to connect the no.3, 7, and 12 pins together?

If so, do I just pry open my ELM327 BT adapter, as it seems to be welded together.

And do I just solder a wire between 3-7 and then 7-12, will that be enough?

Cheers

Soren S - Denmark

BTW: I have started out using your lite version as of right now. But if BT adapter works fine, I'll surely get the paid version :) 

Title: Re: No response from ECU *error?*
Post by: Artur on February 22, 2014, 01:43:16
Hello,

Send log files on info@opel-scanner.com
Title: Re: No response from ECU *error?*
Post by: TheDane on March 14, 2014, 06:59:12
Log files?

Not sure how to get those. Could you point me in the right direction  ;D
Title: Re: No response from ECU *error?*
Post by: Artur on March 14, 2014, 08:21:01
In the app menu there is a Logging item. Make it enbabled, try to establish connection, and send log files, which can be found in the ScanMyOpel folder on the SD card.
Title: Re: No response from ECU *error?*
Post by: petaxd on March 31, 2014, 23:53:35
Hi

I have the same with my two X10XE Corsas.

The app connects to the ecu and sends the manufacturer data, but when i try to show trouble codes and live data it sends "No response from ECU".

i'll try to make the logs and send it to you
Title: Re: No response from ECU *error?*
Post by: Quelha on April 13, 2014, 13:50:16
which interfaces have been tested successfully, manufacturers and models
or software is only compatible with interface blue / orange version 1.4  ??? ??? ???
Title: Re: No response from ECU *error?*
Post by: Artur on April 13, 2014, 23:31:59
Hi,

Actually, any interface with ELM v1.4 should work.
If you have any problems with connect, please send me logs.

Thanks.
Title: Re: No response from ECU *error?*
Post by: Dubrovsky on June 19, 2014, 04:43:06
Quote from: petaxd on March 31, 2014, 23:53:35
Hi

I have the same with my two X10XE Corsas.

The app connects to the ecu and sends the manufacturer data, but when i try to show trouble codes and live data it sends "No response from ECU".

i'll try to make the logs and send it to you

Такая же проблема с  Астра F 1997 года, двигатель X16XEL, более подробное описание и логи сбросил на ящик.
Title: Re: No response from ECU *error?*
Post by: Cruzn on June 29, 2014, 22:13:37
Quote from: TheDane on February 20, 2014, 15:12:29
Hi there mate/mates,

I just received my ELM 327 BT adapter, and tried to hook it up to my '99 Corsa B 1.4 16v.

I'm using my Samsung galaxy S1 with Android 4.2.2 software.

I can connect to the BT adapter, but when I try to go to fault codes, or livedata, I get the "no response from ECU"-error.

Could this be because I need to connect the no.3, 7, and 12 pins together?

If so, do I just pry open my ELM327 BT adapter, as it seems to be welded together.

And do I just solder a wire between 3-7 and then 7-12, will that be enough?

Cheers

Soren S - Denmark

BTW: I have started out using your lite version as of right now. But if BT adapter works fine, I'll surely get the paid version :) 



Is there any more info regarding the joining of the 3 pins? I've been testing on a 99 Astra G with just a couple of small issues regarding correct live data for the AT and wondered if I needed to join the pins and if so after opening up one of the elms I use would the connection be 12-3 and 12-7 and not 3-7-12 connected all together
Title: Re: No response from ECU *error?*
Post by: Artur on June 29, 2014, 22:18:41
Joining 3 pins together is needed to cover all other ECUs on the car, as not all of them are connected to the pin 7.
Title: Re: No response from ECU *error?*
Post by: Cruzn on June 30, 2014, 01:46:46
Quote from: Artur on June 29, 2014, 22:18:41
Joining 3 pins together is needed to cover all other ECUs on the car, as not all of them are connected to the pin 7.

Yes  I understand that, as I was trying the old type elm device that is shown on the board I hoped that doing that might resolve the AT live data issue saying my car is 6 cyl which my 2 newer elm also show, I will attempt to put some logs up, cheers
Title: Re: No response from ECU *error?*
Post by: Artur on June 30, 2014, 07:11:51
The live data issue is the app problem. Send me logs and detailed info.
Title: Re: No response from ECU *error?*
Post by: lekom on September 07, 2014, 16:12:08
Hello,
I also have this problem. The app Connects to the ecu and sends the manufacturer date, but when i try to show trouble codes and live data it sends "No response from the ECU."
I have Opel Corsa X12XE and ELM327 mini.
I am using the lite version.
Logs send to your e-mail (info@opel-scanner.com)
what is the reason?

Sincerely
lekom