OpelScanner

ScanMyOpel => ScanMyOpel Android app => Topic started by: smk on March 07, 2019, 23:52:43

Title: Incompatible ELM interface!
Post by: smk on March 07, 2019, 23:52:43
Hello
My car: Opel Astra G 1.7 DTI (Y17DT) '00
ScanMyOpelLite App isn't able to initiate connection with my car. It shows only "Incompatible ELM interface!" error. I checked my bluetooth interface with ELM327 Identifier, everything was green which means every protocol is supported by my BT interface. So what's wrong?
Thanks in advance for any answer.
Title: Re: Incompatible ELM interface!
Post by: Artur on March 09, 2019, 13:22:19
Please send log files for troubleshooting.
Title: Re: Incompatible ELM interface!
Post by: smk on March 10, 2019, 04:31:54
Here they are: https://we.tl/t-mxyMfFj8jd
Title: Re: Incompatible ELM interface!
Post by: Artur on March 10, 2019, 08:34:18
Hi,

Please make more logs, these are incomplete, and use "Send log files" directly from the application.
Thanks
Title: Re: Incompatible ELM interface!
Post by: smk on March 10, 2019, 13:31:30
I've already made some logs but for your convenience I've searched the last two and sent only them. Here's the whole pack: https://we.tl/t-UmkgEi3SMq
Title: Re: Incompatible ELM interface!
Post by: smk on March 15, 2019, 01:57:17
Is there anything already known about this case? Thanks for any answer.
Title: Re: Incompatible ELM interface!
Post by: Artur on March 15, 2019, 08:36:37
Hi,

In the logs the ELM interfaces says - BUS INIT : ERROR. Check whether pin 7 is not shorted to the ground and there is proper connection with the car.
Title: Re: Incompatible ELM interface!
Post by: GFXMihnea on December 11, 2019, 12:16:21
Y17dt known to have problems with pin 7 obd because of the ecu problem with diesel in it. Remove K plug, and try