Welcome Guest. Please login or register.
« previous next »
Pages: [1]   Go Down

Author Topic: Incompatible ELM interface!  (Read 5316 times)

0 Members and 1 Guest are viewing this topic.

Offline smk

  • Newbie
  • *
  • Posts: 4
Incompatible ELM interface!
« on: March 07, 2019, 23:52:43 »
Hello
My car: Opel Astra G 1.7 DTI (Y17DT) '00
ScanMyOpelLite App isn't able to initiate connection with my car. It shows only "Incompatible ELM interface!" error. I checked my bluetooth interface with ELM327 Identifier, everything was green which means every protocol is supported by my BT interface. So what's wrong?
Thanks in advance for any answer.
Logged

Offline Artur

  • Administrator
  • *****
  • Posts: 3599
    • OpelScanner
Re: Incompatible ELM interface!
« Reply #1 on: March 09, 2019, 13:22:19 »
Please send log files for troubleshooting.
Logged

Offline smk

  • Newbie
  • *
  • Posts: 4
Re: Incompatible ELM interface!
« Reply #2 on: March 10, 2019, 04:31:54 »
Logged

Offline Artur

  • Administrator
  • *****
  • Posts: 3599
    • OpelScanner
Re: Incompatible ELM interface!
« Reply #3 on: March 10, 2019, 08:34:18 »
Hi,

Please make more logs, these are incomplete, and use "Send log files" directly from the application.
Thanks
Logged

Offline smk

  • Newbie
  • *
  • Posts: 4
Re: Incompatible ELM interface!
« Reply #4 on: March 10, 2019, 13:31:30 »
I've already made some logs but for your convenience I've searched the last two and sent only them. Here's the whole pack: https://we.tl/t-UmkgEi3SMq
Logged

Offline smk

  • Newbie
  • *
  • Posts: 4
Re: Incompatible ELM interface!
« Reply #5 on: March 15, 2019, 01:57:17 »
Is there anything already known about this case? Thanks for any answer.
Logged

Offline Artur

  • Administrator
  • *****
  • Posts: 3599
    • OpelScanner
Re: Incompatible ELM interface!
« Reply #6 on: March 15, 2019, 08:36:37 »
Hi,

In the logs the ELM interfaces says - BUS INIT : ERROR. Check whether pin 7 is not shorted to the ground and there is proper connection with the car.
Logged

Offline GFXMihnea

  • Jr. Member
  • **
  • Posts: 5
Re: Incompatible ELM interface!
« Reply #7 on: December 11, 2019, 12:16:21 »
Y17dt known to have problems with pin 7 obd because of the ecu problem with diesel in it. Remove K plug, and try
Logged
Pages: [1]   Go Up
« previous next »