OpelScanner
OpelScanner => OpelScanner => Topic started by: kwackerjeff on August 31, 2007, 01:51:16
-
Is it possible to enable cruise control in the ecu if current state is disabled?
-
Is it possible to enable cruise control in the ecu if current state is disabled?
Hi Jeff, welcome!
What is the problem? You have cruise control and it is disabled?
Regards,
Artur
-
No vehicle at present not got cruise control fitted but parts readily available but you sometimes apparently have to have it enabled via Tech 2.
I just wondered if I could do it with my opel scanner before I fitted all the switches.
Thanks
Jeff
-
No vehicle at present not got cruise control fitted but parts readily available but you sometimes apparently have to have it enabled via Tech 2.
I just wondered if I could do it with my opel scanner before I fitted all the switches.
Thanks
Jeff
I need to test with Tech2. I'll let you know.
-
Is it possible to enable cruise control in the ecu if current state is disabled?
hello kwackerjeff
you dont have to enable cruise control in ecm.most inportand
check if the wiring is compleet in the car check if there is a connector
near the steering colum
if so than connect new switch with cruise control
and it should work
if not let my now
succes
kind regards
Henk Schepers
opel technision
-
Hello Henk
Thanks for the info and wiring info.
On the Astra Owners Club forum they mention that it may have to go on Tech 2 to enable if it does not work so that is why I asked the question.
On my Opelscanner I can see the clutch switch is fitted as it shows the operation in live data.
Link to the info http://www.astraownersclub.com/documents/technical/cruise.pdf
Thanks
Jeff