OpelScanner

ScanMyOpel => ScanMyOpel Android app => Topic started by: smk on March 07, 2019, 23:52:43

Title: Incompatible ELM interface!
Post by: smk on March 07, 2019, 23:52:43

Hello
My car: Opel Astra G 1.7 DTI (Y17DT) '00
ScanMyOpelLite App isn't able to initiate connection with my car. It shows only "Incompatible ELM interface!" error. I checked my bluetooth interface with ELM327 Identifier, everything was green which means every protocol is supported by my BT interface. So what's wrong?
Thanks in advance for any answer.

Title: Re: Incompatible ELM interface!
Post by: Artur on March 09, 2019, 13:22:19

Please send log files for troubleshooting.

Title: Re: Incompatible ELM interface!
Post by: smk on March 10, 2019, 04:31:54

Here they are: https://we.tl/t-mxyMfFj8jd

Title: Re: Incompatible ELM interface!
Post by: Artur on March 10, 2019, 08:34:18

Hi,

Please make more logs, these are incomplete, and use "Send log files" directly from the application.
Thanks

Title: Re: Incompatible ELM interface!
Post by: smk on March 10, 2019, 13:31:30

I've already made some logs but for your convenience I've searched the last two and sent only them. Here's the whole pack: https://we.tl/t-UmkgEi3SMq

Title: Re: Incompatible ELM interface!
Post by: smk on March 15, 2019, 01:57:17

Is there anything already known about this case? Thanks for any answer.

Title: Re: Incompatible ELM interface!
Post by: Artur on March 15, 2019, 08:36:37

Hi,

In the logs the ELM interfaces says - BUS INIT : ERROR. Check whether pin 7 is not shorted to the ground and there is proper connection with the car.

Title: Re: Incompatible ELM interface!
Post by: duayres on February 13, 2023, 09:45:48

Sorry for the necro...
I am getting the same problem here with my Corsa C, using the blue transparent ELM327 mini bluetooth adapter.
I am posting my logs since they seem encrypted (I am a programmer)


Thanks

Title: Re: Incompatible ELM interface!
Post by: Artur on February 13, 2023, 13:10:18

This interface is not going to work - please get ONLY recommended one.

Title: Re: Incompatible ELM interface!
Post by: duayres on February 13, 2023, 13:35:57

There is any list with compatible interfaces?

Title: Re: Incompatible ELM interface!
Post by: Artur on February 22, 2023, 23:57:13

the best one is OBDLinkMX. There are some on the FB page and in the listing.

Title: Re: Incompatible ELM interface!
Post by: ANTONIELSON on March 18, 2023, 19:01:57

I've been looking for a long time for an OBD2 reader that could read real-time data from my Corsa maxx 1.4 2008/2009 (corsa c), I saw a video on YouTube where the scanmyopel application was used
  to read data from a corsa c 2003 with an OBD2 ANCEL scanner(pictured). I acquired the scanner and the scanmyopel license but it is giving an error (Incompatible ELM interface! and id parsing failed), I would like to know if you can help me. I am also sending the logs for analysis.

https://drive.google.com/drive/folders/1HPBXzi953J3fxm0S8wWv_EnVx2HSYrO1?usp=share_link

Title: Re: Incompatible ELM interface!
Post by: Artur on March 18, 2023, 20:02:30

Those interfaces are not going to work with the application. Please follow the recommendations and use ONLY approved and tested ELM adapters.

Title: Re: Incompatible ELM interface!
Post by: duayres on May 05, 2023, 14:43:49

I bought a new dongle which is allegedly v1.5, but it wont work, tried with corsa-c from 2006 to 2008 (my corsa C is the 2008 version) but it doesn't work!
(https://i.imgur.com/mqjfGd3.jpeg)

I've attached the log file, please consider only the tests by day 5 of May (today)

Title: Re: Incompatible ELM interface!
Post by: Artur on May 28, 2023, 18:52:27

Quote from: duayres on May 05, 2023, 14:43:49

I bought a new dongle which is allegedly v1.5, but it wont work, tried with corsa-c from 2006 to 2008 (my corsa C is the 2008 version) but it doesn't work!
(https://i.imgur.com/mqjfGd3.jpeg)

I've attached the log file, please consider only the tests by day 5 of May (today)

That adapter wont work, it sends many extra symbols. Please get recommended adapter.