OpelScanner

OpelScanner => OpelScannerCANPRO => Topic started by: SFLIN on May 16, 2018, 13:56:48

Title: Insignia Cluster Oil Temp
Post by: SFLIN on May 16, 2018, 13:56:48

Hi All.

Pretty new to this, so sorry if this is a silly question  :)

I own a Insignia 2014 with the 8” cluster.
I have enabled alot of the hidden menus and also the Oil temp bar/needle and Volt meter bar/needle.
Volt meter seem to be working fine.
Oil Temp bar and needle is not moving and stays on 40c.

Anyone know why ?

Title: Re: Insignia Cluster Oil Temp
Post by: SFLIN on May 16, 2018, 15:04:12

Well found out, so please delete this post.

Title: Re: Insignia Cluster Oil Temp
Post by: Artur on May 18, 2018, 20:18:53

Please share with us.

Title: Re: Insignia Cluster Oil Temp
Post by: Mrd on May 21, 2018, 06:25:11

I think he have an Diesel.
On Diesel Engines the Oiltemp. is not Working.

Title: Re: Insignia Cluster Oil Temp
Post by: warhamstr on October 05, 2020, 14:33:43

Is there really no way of getting this working? I hate it to have a 'dead' gauge...

Title: Re: Insignia Cluster Oil Temp
Post by: NoToVi on October 05, 2020, 16:24:34

It does not include a sensor and wiring.

Title: Re: Insignia Cluster Oil Temp
Post by: warhamstr on October 06, 2020, 01:01:57

So, by default. Say a original car from 2015 with diesel engine, nothing is showed on that part of the display?

Title: Re: Insignia Cluster Oil Temp
Post by: Albrown on November 07, 2020, 04:19:21

No, unfortunately not. I have heard reports of a retrofitted sensor, but it still doesn't work as the bcm doesn't send a pressure reading to the cluster. No matter if the cluster is enabled or not.

Title: Re: Insignia Cluster Oil Temp
Post by: alexromania1 on December 26, 2020, 02:08:20

but somebody try to use that indicator to show temperature of water??? is much better than nothing