OpelScanner

OpelScanner => OpelScannerCAN => Topic started by: pnj on February 16, 2017, 02:52:16

Title: Corsa D 1.3 Z13DTJ injector coding
Post by: pnj on February 16, 2017, 02:52:16

Hello

We just replaced Engine ECU in abowe type MJD603 due to water damage.

Immo coding is fine and car starts.

However we get error regarding injector coding not right, as old ecu is to damaged to work with over diagnosis we can not read injector values from it.

Anyone know how to get coding in this case ?

Thanks in advance

Best Regards

Pierre

Title: Re: Corsa D 1.3 Z13DTJ injector coding
Post by: Artur on February 16, 2017, 08:35:29

Hi Pierre,

As far as I know, you need to program to the ECU values, printed on the injectors.

Title: Re: Corsa D 1.3 Z13DTJ injector coding
Post by: pnj on February 17, 2017, 15:51:31

Thanks Artur

Yes thats what I heard also just collecting some pictures from the web to see what we are dealing with ;)
Looks like it must be the code with have nine letters like:
AAACA6CCR
Or
AIHYBTB8S

Please correct me if wrong

Also how we know cylinder 1 driver side or passager side ?

Thanks in advance

Pierre

Title: Re: Corsa D 1.3 Z13DTJ injector coding
Post by: pnj on February 21, 2017, 13:01:17

Hi again
Just did my first attempt , unfortenally car reject the coding, seems some problem with car
Cross chekked with other tool but the same.
Anyone know if I have to prepare car in any special way before starting injector coding ? ???

Thanks in advance