OpelScanner

OpelScanner => OpelScannerCANPRO => Topic started by: MWautos on August 22, 2012, 18:09:14

Title: Reflashing and coding Z14XE ECM - P1615 & P1616 Fault Codes
Post by: MWautos on August 22, 2012, 18:09:14

Hi All,

Need some help please, I have carried out the following work:

Read original ECM - Z14XE Corsa C Automatic Gearbox - Full Flash dump
Uploaded to an Astra G Z16XE Manual ECM - all OK
Read Pin from Updated ECM and reset.
Coded to Corsa within Immo.

Now have the following codes in ECM
P1615 WRONG VEHICLE ID FROM BODY CONTROLLER and P1616 WRONG VEHICLE ID FROM INSTRUMENT

Any help would be great.

Thanks in advance

Title: Re: Reflashing and coding Z14XE ECM - P1615 & P1616 Fault Codes
Post by: auto_prof on August 22, 2012, 19:24:13

You must reset Body Control and Instruments also,
Go to Body Control -special function-reset ECU,and the same in Instruments
I hope it success .

Title: Re: Reflashing and coding Z14XE ECM - P1615 & P1616 Fault Codes
Post by: MWautos on August 23, 2012, 02:47:28

Thank you for the reply, I thought I might try that today, I guess that will link the ECUs together - fingers crossed.

Title: Re: Reflashing and coding Z14XE ECM - P1615 & P1616 Fault Codes
Post by: MWautos on August 23, 2012, 18:15:11

Reset option worked, car is fixed - so thats an Astra G ECM Z16XE Manual, fitted to a Corsa C Z14XE Automatic - absolutely awesome!!!

Title: Re: Reflashing and coding Z14XE ECM - P1615 & P1616 Fault Codes
Post by: auto_prof on August 24, 2012, 10:55:55

Good work   ;D