OpelScanner

OpelScanner => OpelScannerCANPRO => Topic started by: auto_prof on July 28, 2012, 22:24:28

Title: X18XE1
Post by: auto_prof on July 28, 2012, 22:24:28

Hi All,
Is there any update to read security code from X18XE1 ECUs.
Thanks

Title: Re: X18XE1
Post by: Artur on July 28, 2012, 22:33:08

Not yet.

Title: Re: X18XE1
Post by: davo on July 29, 2012, 01:32:59

Приблизительно когда ожидается?

Title: Re: X18XE1
Post by: Artur on July 29, 2012, 08:06:08

Не могу сказать.

Title: Re: X18XE1
Post by: davo on July 29, 2012, 11:24:44

Ладно будем ждать.

Title: Re: X18XE1
Post by: Futurama on October 10, 2012, 06:46:59

Quote from: Artur on July 28, 2012, 22:33:08

Not yet.

@Artur: What is missing? Seed/Key algo or table? The complete doing?

Title: Re: X18XE1
Post by: Artur on October 10, 2012, 06:51:00

I do not know algo of second level seed/key. Can you help me with it?

Title: Re: X18XE1
Post by: Futurama on October 10, 2012, 11:13:36

I don't know if these are Level2 seeds cause i didn't have the chance till now to test them on a X18XE1 (Simtec 70)

From my infos the security key should be 2 bytes in the eeprom at 0x30 (VIN should start at 0x4c)
 
Example:
0x30: 12 44 xx xx xx xx xx xx xx xx xx xx xx xx xx xx
0x40: xx xx xx xx xx xx xx xx xx xx xx xx 57 30 4C 30

in the EEPROM

The SecCode is than 4412

Attached the seed/key table i have...perhaps you can compare them with your seed/key's.

Here's an example how to use the table (Communication from Multec)

Sendblock: 82 11 F1 27 01 AC
Readblock: 84 F1 11 67 01 17 64 69
Sendblock: 84 11 F1 27 02 18 FF C6
Readblock: 83 F1 11 67 02 34 22

Seed is 0x1764
Key based on my Multec table is 0x18FF

If i use the same seed on my Simtec Table it results in key 0xC499

Please let me know if these are your missings key's or if they are just Level1 keys.

You'll find the PWD in the PM i've send you