OpelScanner

English Section => Diagnostics => Topic started by: auto_prof on July 21, 2012, 20:57:27

Title: Corsa Hall Sensor
Post by: auto_prof on July 21, 2012, 20:57:27

Hi All,
I have a corsa X1.0XE and do not start i scanned it and found P0340 Hall Sensor High Voltage all parameters else is OK.
I changed Crank,Cam Sensor ECU and it is the same,any ideas .
Thanks

Title: Re: Corsa Hall Sensor
Post by: Treig on July 22, 2012, 05:49:40

Try without cam sensor.

Title: Re: Corsa Hall Sensor
Post by: auto_prof on July 22, 2012, 06:16:12

It is the same!!

Title: Re: Corsa Hall Sensor
Post by: Treig on July 22, 2012, 14:37:18

compression? do you check it?

Title: Re: Corsa Hall Sensor
Post by: auto_prof on July 23, 2012, 14:58:53

OK,i found a cut in  wire in the cam sensor, the fault never came ,but didn't start again.
i found that the fuel  return valve is bad and didn't made a pressure in the injectors pipe
Thanks for help and support