OpelScanner

OpelScanner => OpelScannerCANPRO => Topic started by: biggugus on March 07, 2011, 13:13:24

Title: Vectra B X18XE simtec 70 Engine ECU replacement .
Post by: biggugus on March 07, 2011, 13:13:24

I bought a new ECU to replace the old defective, but I impossbile to connect with OpelscannerCANPRO.
 Why?
 It is possible to synchronize only used ECU?

Title: Re: Vectra B X18XE simtec 70 Engine ECU replacement .
Post by: Artur on March 07, 2011, 13:24:33

Any logs?

Title: Re: Vectra B X18XE simtec 70 Engine ECU replacement .
Post by: biggugus on March 07, 2011, 13:42:59

Yes:

http://artoutitou.free.fr/automobiles/log.rar

More log with CANpro and CAN.
Astra, vectra, etc.

Title: Re: Vectra B X18XE simtec 70 Engine ECU replacement .
Post by: Artur on March 07, 2011, 13:52:58

New ECU has to be programmed with Tech2.

Title: Re: Vectra B X18XE simtec 70 Engine ECU replacement .
Post by: biggugus on March 07, 2011, 14:17:50

Ok, opelscanerCANPRO it's only for used ECU ?

Title: Re: Vectra B X18XE simtec 70 Engine ECU replacement .
Post by: Artur on March 07, 2011, 14:38:16

yes, correct.