OpelScanner

English Section => Miscellaneous => Topic started by: newmedia on November 12, 2007, 11:12:03

Title: adapting obd2 to 10 pin opel obd1
Post by: newmedia on November 12, 2007, 11:12:03

i want to scan an opel vectra A
this model has an 10 pin OBD1 socket

my opel scanner adapter  is OBD2 - 16 pins
I read that i can  adapt this interfaces by using 3 wires

now the problem is what pin goes where ?

(http://img50.imageshack.us/img50/7449/obd1xp6.jpg)

(http://img220.imageshack.us/img220/7257/obd2xr3.jpg)

Title: Re: adapting obd2 to 10 pin opel obd1
Post by: Artur on November 12, 2007, 11:17:28

16 pin   ---   10 pin

4-5     ->        A
16       ->        F
7        ->        G

Title: Re: adapting obd2 to 10 pin opel obd1
Post by: newmedia on November 12, 2007, 11:25:03

Quote

16 pin   ---   10 pin

4-5     ->        A
16       ->        F
7        ->        G

4-5 = >  4 and 5 / 4 or 5 ????

Title: Re: adapting obd2 to 10 pin opel obd1
Post by: Artur on November 12, 2007, 12:11:15

4 or 5, both are grounds.

Title: Re: adapting obd2 to 10 pin opel obd1
Post by: uglymonkey on December 01, 2007, 15:40:06

perfect  :)

just what I needed to know if I don't manage to find a cheap ALDL / OBD1 cable

thank you
james

Title: Re: adapting obd2 to 10 pin opel obd1
Post by: apasaciu on June 01, 2012, 09:54:03

Hello !
But if I want to connect 8 pin from obd 2 to aldl pin K ? I want to connect to MID . Is this correct ? Ty very much ! (i have an 95 astra F )

Title: Re: adapting obd2 to 10 pin opel obd1
Post by: Futurama on June 02, 2012, 06:56:42

Look on ebay...very cheap adapter cables there