OpelScanner

OpelScanner => OpelScanner => Topic started by: goran.1971 on November 14, 2010, 02:08:43

Title: Validity k line
Post by: goran.1971 on November 14, 2010, 02:08:43
hello
please explain,
how to examine the validity of k lines  ???
the oldies Opel cars
with obd1 connector, 10 pin
how much voltage must be
tnx
Title: Re: Validity k line
Post by: Artur on December 23, 2010, 14:46:58
What do you mean by validity?
Title: Re: Validity k line
Post by: hackdoom on January 11, 2011, 11:21:55
Quote from: Artur on December 23, 2010, 14:46:58
What do you mean by validity?


Car :  1994 corsa b 1.2     with ECU/ECM Opel GM 16163409

I have connector with 10 pins like the one in the picture

aldl k-line on opelscaner interface is on 12v . Conected to "G"
When i try to connect to ecu {  engine } opelscaner softwere  try to "Conect..." and then returns "Not Conected " without errors !

Aldl connector on pin G from the car is 12mV

It looks like ecu does not wake up

Paper Clip test  Pin A and pin B  is working well !
I try to conect pin a and pin b with a 10k resistor but opelscaner refuse to connect !


http://postimage.org/image/1mt9kpv8k/ (http://postimage.org/image/1mt9kpv8k/)



 
Title: Re: Validity k line
Post by: Artur on January 11, 2011, 14:20:49
10k resistor is not for this case. Please send me logs, will check.
Title: Re: Validity k line
Post by: hackdoom on January 12, 2011, 03:16:31
Quote from: Artur on January 11, 2011, 14:20:49
10k resistor is not for this case. Please send me logs, will check.

logs send to info@opel-scanner.com
Title: Re: Validity k line
Post by: Artur on January 12, 2011, 03:23:18
You interface is pirate clone, so I have no idea, what could cause problem.
Title: Re: Validity k line
Post by: hackdoom on January 12, 2011, 03:32:23
Quote from: Artur on January 12, 2011, 03:23:18
You interface is pirate clone, so I have no idea, what could cause problem.


Is made by my hand not by pirates :(
i made it because my laptop have usb conection
i will send you my electric schematics and pictures of Printed Circuit Bord and send you the data from attiny2313 uC...

At least please give me a ideea where to search the problem
Tahk you in advanced
Title: Re: Validity k line
Post by: Artur on January 12, 2011, 03:35:11
I can not say anything, since hardware is not made by us.
Title: Re: Validity k line
Post by: hackdoom on January 12, 2011, 03:46:45
Quote from: Artur on January 12, 2011, 03:35:11
I can not say anything, since hardware is not made by us.

ok,then sorry for distubing you :(
i wnat to tel you that in romania , the contry where i live the medium salary is up to 150[euro]
and your product "Auto Scanner Opel CAN USB" is 420 euro
.........
i want  but I can not afford to buy{ sorry }

i will try to made ...op-com if no succes with opel scanner :(

Tank you for answer me on this topic
I want to tell you that a like the design and the ideea of opel-scanner