OpelScanner
Ремонт и диагностика авто => Иммо => Topic started by: testourii on October 17, 2007, 11:35:44
-
Hi all
where to find immobox for Opel Tigra year 1999, car is lost all keys
thanks in advance
-
Not sure, how can we help...
In this case you have to make new key with new transponder.
-
Yes, it is necessary to make new keys with a chip or chips recover occasion.
It is then necessary to encode the keys with et new chips in the transponder after obliterated the old keys.
It is possible to encode 5 Keys max.
-
Yes, it is necessary to make new keys with a chip or chips recover occasion.
It is then necessary to encode the keys with et new chips in the transponder after obliterated the old keys.
It is possible to encode 5 Keys max.
OK, I see. Do you have car pass with security code?
-
Myself, I have not had with cars purchased used.
Opel You have to pay for the security code.
I look forward to the version opel scaner that will read the codes to program my keys.
-
Actually, you do not have to pay much for security code to Opel. It may cost approx. 20 $.
Seems you have Immo1. I'm almost sure, the eeprom in it will be closed for reading.
Please send me log - I'll tell you exactly. If yes - the program will not work to read the code, sorry.
You have 2 way - order the code to Opel or read the eeprom from Motorola microcontroller by yourself.
-
This is not good news for me.
I have 5 tigra, therefore it is necessary that the pay 5 times. :o
-
I find immo for this car it's immo1, I read MCU motorola HC05b6, and from dump I got my PIN and I programmed with advanced diagnostic tool.
Thanks for explanation how to find PIN code in Immo1 eeprom dump description document
-
Just asking.
Where is the imobiliser?
In the ECU or the transponder under the driving wheel.
If I change the ECU by a second hand, I need to program its code keys?
-
Just asking.
Where is the imobiliser?
In the ECU or the transponder under the driving wheel.
If I change the ECU by a second hand, I need to program its code keys?
Actually the Immo itself under the steering wheel. Transponder is in the key.
If you change ECU, you will have to program keys and sinchronize immo with engine ECU.
-
ok,
So, if I buy a second-hand ECU, I have the security code of the ECU used ?
-
ok,
So, if I buy a second-hand ECU, I have the security code of the ECU used ?
You have to read motorola to get the code.
-
Motorala are in the ecu or in the Immo under the steering wheel?
-
Motorala are in the ecu or in the Immo under the steering wheel?
Motorola is in the Immo1 and under steering wheel.
-
I am lost. ;D
You say:
Actually the Immo itself under the steering wheel. Transponder is in the key.
If you change ECU, you will have to program keys and sinchronize immo with engine ECU.
Let me use an ECU used.
If I keep the transponder and imobilizer home, and I just change the ECU, then I must sinchronize immo whith ECU, but how?
-
What do you mean - at home? The immo must be installed on the car.
If you change ECU - you have to synchronize the Immo and engine's ECU. The Tech can do that.
Our software at some extent also can do that. Write me privately, I'll give detailes.