Welcome Guest. Please login or register.

Author Topic: Incompatible ELM interface!  (Read 9548 times)

0 Members and 1 Guest are viewing this topic.

Offline smk

  • Newbie
  • *
  • Posts: 4
Incompatible ELM interface!
« on: March 07, 2019, 23:52:43 »
Hello
My car: Opel Astra G 1.7 DTI (Y17DT) '00
ScanMyOpelLite App isn't able to initiate connection with my car. It shows only "Incompatible ELM interface!" error. I checked my bluetooth interface with ELM327 Identifier, everything was green which means every protocol is supported by my BT interface. So what's wrong?
Thanks in advance for any answer.


Offline Artur

  • Administrator
  • *****
  • Posts: 3615
    • OpelScanner
Re: Incompatible ELM interface!
« Reply #1 on: March 09, 2019, 13:22:19 »
Please send log files for troubleshooting.

Offline smk

  • Newbie
  • *
  • Posts: 4
Re: Incompatible ELM interface!
« Reply #2 on: March 10, 2019, 04:31:54 »

Offline Artur

  • Administrator
  • *****
  • Posts: 3615
    • OpelScanner
Re: Incompatible ELM interface!
« Reply #3 on: March 10, 2019, 08:34:18 »
Hi,

Please make more logs, these are incomplete, and use "Send log files" directly from the application.
Thanks

Offline smk

  • Newbie
  • *
  • Posts: 4
Re: Incompatible ELM interface!
« Reply #4 on: March 10, 2019, 13:31:30 »
I've already made some logs but for your convenience I've searched the last two and sent only them. Here's the whole pack: https://we.tl/t-UmkgEi3SMq

Offline smk

  • Newbie
  • *
  • Posts: 4
Re: Incompatible ELM interface!
« Reply #5 on: March 15, 2019, 01:57:17 »
Is there anything already known about this case? Thanks for any answer.

Offline Artur

  • Administrator
  • *****
  • Posts: 3615
    • OpelScanner
Re: Incompatible ELM interface!
« Reply #6 on: March 15, 2019, 08:36:37 »
Hi,

In the logs the ELM interfaces says - BUS INIT : ERROR. Check whether pin 7 is not shorted to the ground and there is proper connection with the car.

Offline GFXMihnea

  • Jr. Member
  • **
  • Posts: 5
Re: Incompatible ELM interface!
« Reply #7 on: December 11, 2019, 12:16:21 »
Y17dt known to have problems with pin 7 obd because of the ecu problem with diesel in it. Remove K plug, and try

Offline duayres

  • Newbie
  • *
  • Posts: 3
Re: Incompatible ELM interface!
« Reply #8 on: February 13, 2023, 09:45:48 »
Sorry for the necro...
I am getting the same problem here with my Corsa C, using the blue transparent ELM327 mini bluetooth adapter.
I am posting my logs since they seem encrypted (I am a programmer)


Thanks

Offline Artur

  • Administrator
  • *****
  • Posts: 3615
    • OpelScanner
Re: Incompatible ELM interface!
« Reply #9 on: February 13, 2023, 13:10:18 »
This interface is not going to work - please get ONLY recommended one.

Offline duayres

  • Newbie
  • *
  • Posts: 3
Re: Incompatible ELM interface!
« Reply #10 on: February 13, 2023, 13:35:57 »
There is any list with compatible interfaces?

Offline Artur

  • Administrator
  • *****
  • Posts: 3615
    • OpelScanner
Re: Incompatible ELM interface!
« Reply #11 on: February 22, 2023, 23:57:13 »
the best one is OBDLinkMX. There are some on the FB page and in the listing.

Offline ANTONIELSON

  • Newbie
  • *
  • Posts: 1
Re: Incompatible ELM interface!
« Reply #12 on: March 18, 2023, 19:01:57 »
I've been looking for a long time for an OBD2 reader that could read real-time data from my Corsa maxx 1.4 2008/2009 (corsa c), I saw a video on YouTube where the scanmyopel application was used
  to read data from a corsa c 2003 with an OBD2 ANCEL scanner(pictured). I acquired the scanner and the scanmyopel license but it is giving an error (Incompatible ELM interface! and id parsing failed), I would like to know if you can help me. I am also sending the logs for analysis.

https://drive.google.com/drive/folders/1HPBXzi953J3fxm0S8wWv_EnVx2HSYrO1?usp=share_link

Offline Artur

  • Administrator
  • *****
  • Posts: 3615
    • OpelScanner
Re: Incompatible ELM interface!
« Reply #13 on: March 18, 2023, 20:02:30 »
Those interfaces are not going to work with the application. Please follow the recommendations and use ONLY approved and tested ELM adapters.

Offline duayres

  • Newbie
  • *
  • Posts: 3
Re: Incompatible ELM interface!
« Reply #14 on: May 05, 2023, 14:43:49 »
I bought a new dongle which is allegedly v1.5, but it wont work, tried with corsa-c from 2006 to 2008 (my corsa C is the 2008 version) but it doesn't work!


I've attached the log file, please consider only the tests by day 5 of May (today)

Offline Artur

  • Administrator
  • *****
  • Posts: 3615
    • OpelScanner
Re: Incompatible ELM interface!
« Reply #15 on: May 28, 2023, 18:52:27 »
I bought a new dongle which is allegedly v1.5, but it wont work, tried with corsa-c from 2006 to 2008 (my corsa C is the 2008 version) but it doesn't work!


I've attached the log file, please consider only the tests by day 5 of May (today)
That adapter wont work, it sends many extra symbols. Please get recommended adapter.