Author Topic: ScanMyOpelCAN betatesting (Read 37792 times)

Artur · « **on:** November 14, 2013, 08:11:38 »

Here will be posted new versions and feedbacks from betatesters.

kadett90 · « **Reply #1 on:** December 01, 2013, 07:29:02 »

Astra H my-2006.
Works great. (Engine,Abs,Cim)

Artur · « **Reply #2 on:** December 01, 2013, 07:51:26 »

Hi,

Thanks a lot. Can you send me logs?
What about AT? No AT or failled to connect?

Can you help me to translate app (s) in Finnish?

Thanks,
Artur

kadett90 · « **Reply #3 on:** December 01, 2013, 07:57:22 »

I send logs with email.
No AT in this car.
I can help with translate.

kadett90 · « **Reply #4 on:** December 08, 2013, 12:21:05 »

Did you get my logs?

Artur · « **Reply #5 on:** December 08, 2013, 12:47:31 »

Yes, I got them, thanks. Soon will come up with new version and files for translation.

kadett90 · « **Reply #6 on:** December 31, 2013, 06:31:54 »

Vectra C -07 Z28NET
Engine,ok
At,no at in this car
Abs,id parsing failed
Eps,id parsing failed
Cim,ok

No logs sorry (was disabled)

tower · « **Reply #7 on:** May 22, 2014, 02:34:29 »

Где можно скачать приложение?

gyoma8 · « **Reply #8 on:** December 15, 2014, 03:58:56 »

Quote from: Artur on November 14, 2013, 08:11:38

Here will be posted new versions and feedbacks from betatesters.

Hello Admin,
I tried to use the app, but at the very first screen I can not pair with BT OBD device. It says I can specify it at SETUP, but there is no SETUP button. I use androis phone Jelly Bean OP, 4.1.1.
What is the solution?
Regards,
Zoltan

PS: I posted it at Google Groups too.

Artur · « **Reply #9 on:** December 15, 2014, 10:25:14 »

The Setup button is the one, you use is global phone setup.

gyoma8 · « **Reply #10 on:** December 16, 2014, 04:19:09 »

Quote from: Artur on December 15, 2014, 10:25:14

The Setup button is the one, you use is global phone setup.

Hi,
of course I paired with ELM327 1.5 before. For example TORQUE pairs immediately with it. What else "setuping" do I need with the software?
Zoltan

gyoma8 · « **Reply #11 on:** December 19, 2014, 08:31:51 »

Hi, I am still suffering from the unsuccessful starting.
Did anybody have such a starting problem?

What I did:
I started Torque, what is automatically pairs with ELM 327.
After I started ScanMyOpelCAN app.
So theoretically my phone is connected with ELM327.
But I can not do anything.

CONNECT button is still red.

Artur · « **Reply #12 on:** December 19, 2014, 08:41:27 »

You need to select the BT interface in the software.

gyoma8 · « **Reply #13 on:** January 05, 2015, 05:24:51 »

Dear Artur,

as I am not an IT expert, can you pay 2 minutes attention explaining me what should I do?
Where can I select this BT interface at the software? I can not click anywhere on the start screen, I can only select the type of car, engine etc. An I can "Connect", but as I wrote, it is red, so I can not click on it.
I would be test your smart software but I face difficilities, please help!
Regards,
Zoltan

Artur · « **Reply #14 on:** January 05, 2015, 19:16:29 »

Zoltan,
Show me the screenshot of the app.

gyoma8 · « **Reply #15 on:** January 12, 2015, 08:59:32 »

Hi Artur,
I try to attach here

Artur · « **Reply #16 on:** January 12, 2015, 09:21:58 »

Do you have something like settings Button?

gyoma8 · « **Reply #17 on:** January 12, 2015, 10:32:32 »

No other buttons displayed on the screen.
Where should it be ideally?
I have a standard Android phone, nothing extraordinary on hardware side.

kadett90 · « **Reply #18 on:** January 12, 2015, 12:43:45 »

Check your phone's manual where is the menu-button.

gyoma8 · « **Reply #19 on:** January 13, 2015, 08:52:08 »

Ok, I did checked by myself, I quite well know my phone.
The ELM327 was paired by he Bluetooth settings.
As I mentioned, Torque is running smooth with ELM327.

Let us see the necessary steps 1 by 1:

1.) I downloaded your app.
2.) BT is paired with ELM327, BT is on.
3.) I click your App on the screen.
4.) I received the uploaded screen, I can choose the type of the car etc.
5.) The "CONNECT" button is RED on the screen.
6.)

What am I doing wrong

What is the next step??

kadett90 · « **Reply #20 on:** January 13, 2015, 08:57:54 »

Next step is click your phone's menu-button.

gyoma8 · « **Reply #21 on:** January 13, 2015, 09:40:38 »

Roger Sir!

And then...?

kadett90 · « **Reply #22 on:** January 13, 2015, 09:46:35 »

At the bottom of the phone's display should open menu where you can choose:
-bluetooth
-enable logging
-about

Artur · « **Reply #23 on:** January 13, 2015, 09:49:17 »

Actually, on some Android versions the Settings button can be missing.

kadett90 · « **Reply #24 on:** January 13, 2015, 09:56:21 »

What on earth man can do then?

News:

Author Topic: ScanMyOpelCAN betatesting (Read 37792 times)