Welcome Guest. Please login or register.

Author Topic: having a software problem with opel scanner  (Read 28491 times)

0 Members and 1 Guest are viewing this topic.

Offline geffd65

  • Newbie
  • *
  • Posts: 3
having a software problem with opel scanner
« on: February 07, 2009, 12:57:50 »
Having a software problem with my opel scanner- I have been using it for nearly two years with no problems but now it is coming up with an error - even the disc will not re-load for some reason.

is there away i can download the latest software from this site?


Offline Artur

  • Administrator
  • *****
  • Posts: 3611
    • OpelScanner
Re: having a software problem with opel scanner
« Reply #1 on: February 07, 2009, 13:11:31 »
Need more details for troubleshooting.
What is the ID of the interface?

Offline geffd65

  • Newbie
  • *
  • Posts: 3
Re: having a software problem with opel scanner
« Reply #2 on: February 08, 2009, 07:00:10 »
Hi Arther,

The ID code is:  A372 purchased may 07 from Chris Whittle who purchased a few from you


The software is: 1.0.1.65  - this now only goes to start up screen then when you select ecu it comes up with an error and then closes, disc will not load even to another laptop

Offline Artur

  • Administrator
  • *****
  • Posts: 3611
    • OpelScanner
Re: having a software problem with opel scanner
« Reply #3 on: February 08, 2009, 07:26:04 »
Check your private message box.

Offline geffd65

  • Newbie
  • *
  • Posts: 3
Re: having a software problem with opel scanner
« Reply #4 on: February 08, 2009, 10:41:32 »
Thanks very much arther - up and working again

thanks again

Geffd65


Check your private message box.

Offline nerghal

  • Newbie
  • *
  • Posts: 2
Re: having a software problem with opel scanner
« Reply #5 on: October 06, 2009, 06:33:52 »
Hi, all, al have any problem about opel scanner 1.65, ID#:155,  but, when i select ECU , have Error and program close, help please
« Last Edit: October 06, 2009, 06:37:55 by nerghal »

Offline Artur

  • Administrator
  • *****
  • Posts: 3611
    • OpelScanner
Re: having a software problem with opel scanner
« Reply #6 on: October 06, 2009, 08:09:04 »
Hi, all, al have any problem about opel scanner 1.65, ID#:155,  but, when i select ECU , have Error and program close, help please

Hi,

Where did you get the software and hardware?


Offline nerghal

  • Newbie
  • *
  • Posts: 2
Re: having a software problem with opel scanner
« Reply #7 on: October 06, 2009, 08:29:51 »
This software i hardware i have from this :http://www.allegro.pl/item754475736_interfejs_opel_scanner_1_0_1_70_z_obd2_aldl.html
Company Viaken

Offline Artur

  • Administrator
  • *****
  • Posts: 3611
    • OpelScanner
Re: having a software problem with opel scanner
« Reply #8 on: October 06, 2009, 08:33:55 »
This company sell only clones of our interface.
Sorry, I can not be helpful for you.

Offline andrew_lumb

  • Jr. Member
  • **
  • Posts: 11
Re: having a software problem with opel scanner
« Reply #9 on: January 31, 2010, 04:19:07 »
Hi,

I have the same problem as the original post. Can you help?

Thanks. :)

Check your private message box.

Offline Artur

  • Administrator
  • *****
  • Posts: 3611
    • OpelScanner
Re: having a software problem with opel scanner
« Reply #10 on: January 31, 2010, 04:28:36 »
Hi,

I have the same problem as the original post. Can you help?

Thanks. :)

Check your private message box.
What is your interface ID? I need to see logs.

Offline andrew_lumb

  • Jr. Member
  • **
  • Posts: 11
Re: having a software problem with opel scanner
« Reply #11 on: January 31, 2010, 04:33:21 »
The software is A371
Actually, i can load the software, but when I click 'select ecu' the program crashes.
It does this on 4 laptops and computers I have tried.

Thanks.

Offline Artur

  • Administrator
  • *****
  • Posts: 3611
    • OpelScanner
Re: having a software problem with opel scanner
« Reply #12 on: January 31, 2010, 05:48:55 »
The software is A371
Actually, i can load the software, but when I click 'select ecu' the program crashes.
It does this on 4 laptops and computers I have tried.

Thanks.

What version do you run?

Offline andrew_lumb

  • Jr. Member
  • **
  • Posts: 11
Re: having a software problem with opel scanner
« Reply #13 on: January 31, 2010, 06:11:47 »
1.0.1.61

Offline andrew_lumb

  • Jr. Member
  • **
  • Posts: 11
Re: having a software problem with opel scanner
« Reply #14 on: January 31, 2010, 06:16:33 »
I  haven't used the software for a little while - i wondered perhaps if it was conflicting with a windows update (running xp home with updates) or if the software had expired and needed updating?
Thanks :)

Offline Artur

  • Administrator
  • *****
  • Posts: 3611
    • OpelScanner
Re: having a software problem with opel scanner
« Reply #15 on: January 31, 2010, 06:39:21 »
Just download new version from the web-site.

Offline andrew_lumb

  • Jr. Member
  • **
  • Posts: 11
Re: having a software problem with opel scanner
« Reply #16 on: January 31, 2010, 08:41:24 »
can you provide a link?
I can only see CAN and PRO versions. do i need CAN?
« Last Edit: January 31, 2010, 08:43:04 by andrew_lumb »

Offline Artur

  • Administrator
  • *****
  • Posts: 3611
    • OpelScanner
Re: having a software problem with opel scanner
« Reply #17 on: January 31, 2010, 08:50:49 »
Check PM.

Offline andrew_lumb

  • Jr. Member
  • **
  • Posts: 11
Re: having a software problem with opel scanner
« Reply #18 on: January 31, 2010, 10:22:09 »
Many thanks, this appears to work now :)

Andrew.

Offline geffd

  • Jr. Member
  • **
  • Posts: 7
Re: having a software problem with opel scanner
« Reply #19 on: February 13, 2010, 06:12:21 »
Having a problem connecting to later versions of the Vauxhall Calibra V6 - both cars i tested had the later engine X25XE engine instead of the earlier C25XE engine -  problem i have just does not connect to ecu - no problem with the earlier C25Xe



Having a software problem with my opel scanner- I have been using it for nearly two years with no problems but now it is coming up with an error - even the disc will not re-load for some reason.

is there away i can download the latest software from this site?

Offline Artur

  • Administrator
  • *****
  • Posts: 3611
    • OpelScanner
Re: having a software problem with opel scanner
« Reply #20 on: February 13, 2010, 06:25:03 »
Did you try M2.81 from Omega B?

Offline andrew_lumb

  • Jr. Member
  • **
  • Posts: 11
Re: having a software problem with opel scanner
« Reply #21 on: February 22, 2010, 13:15:18 »
Many thanks, this appears to work now :)

Andrew.

That said, I have just tried the new software with my hardware, and I get a message saying the hardware is not correct for this version of the software, and that I should stop before my hardware is deactivated or something!

The only information on the dongle is A371.
My original version of the software is A371 1,0,1,61 - This stopped working when I select ECU.
The recent software you provided is A361 1,0,1,71 - This conflicts with hardware when I press start.

Is there another version of the software I can try?

Thanks in advance :)

Offline Artur

  • Administrator
  • *****
  • Posts: 3611
    • OpelScanner
Re: having a software problem with opel scanner
« Reply #22 on: February 22, 2010, 13:42:54 »
Check PM.

Offline Jarski

  • Newbie
  • *
  • Posts: 1
Re: having a software problem with opel scanner
« Reply #23 on: April 14, 2010, 02:16:00 »
Hi
I'm having some problems at connecting to engine ecu. Immobilizer and some other ecus works fine. My car is -95 Omega B 2.0 16v and ID: A427 originally bought from Elekma Oy Finland, I bought this from my friend, got also the original receipt. Software is 1.0.1.70.
Really need some help..

Offline Artur

  • Administrator
  • *****
  • Posts: 3611
    • OpelScanner
Re: having a software problem with opel scanner
« Reply #24 on: April 14, 2010, 02:18:00 »
Send me log files, made on this car.