Welcome Guest. Please login or register.

English Section > Diagnostics

DTC 35 ABS tigra/corsa-B 1995 Type 4/4-F

(1/1)

biggugus:
I have one dtc 35 (return pompe relai circuit) in my tigra ABS 4/4-F.
I changed the relays of the pump, but it has not solved the problem.
I tried another pump, it has not solved the problem.

Someone would not have the control method of beam or a doc technical English?

Treig:
Sorry /
But may be you need to check voltages on pump especially on red wire (fat . One of possibilities is bad contact with load connected to thise wire. Thise can result in normal voltage with pump unit disconnected and very low voltage when you turn on ignition and engage ABS unit.

biggugus:

--- Quote from: Treig on March 29, 2008, 09:35:59 ---Sorry /
But may be you need to check voltages on pump especially on red wire (fat . One of possibilities is bad contact with load connected to thise wire. Thise can result in normal voltage with pump unit disconnected and very low voltage when you turn on ignition and engage ABS unit.

--- End quote ---

Yes, you are the best.
On red wire voltage is 0v on pump.
Bad contact in connector foot door.
Thank's.

Treig:
You are welcome.
It's quite often error.

Navigation

[0] Message Index

Go to full version