Welcome Guest. Please login or register.

Author Topic: problem with c20let eds  (Read 13278 times)

0 Members and 1 Guest are viewing this topic.

Offline mic43

  • Newbie
  • *
  • Posts: 3
problem with c20let eds
« on: November 09, 2015, 07:35:55 »
hello all

here is my problem and sorry for my english
i can't work with the opel scanner on my calibra phase 4 and the same problem with an other one eds 2 when the engine is on
but work fine when the engine is not running
work nice in an original set up

have you got a solution ?

thanks


Offline Makkenek

  • Full Member
  • ***
  • Posts: 50
Re: problem with c20let eds
« Reply #1 on: November 09, 2015, 12:44:09 »
Hi. Hmm, don't know what I wrote, but if the problem is in the connection of the scanner with the engine running, start with checking the high-voltage part of the car.

Offline mic43

  • Newbie
  • *
  • Posts: 3
Re: problem with c20let eds
« Reply #2 on: November 09, 2015, 15:21:08 »
work fine with standard eprom  ;)

Offline Topbuzz

  • Jr. Member
  • **
  • Posts: 29
    • Topbuzz Website
Re: problem with c20let eds
« Reply #3 on: October 18, 2016, 13:35:00 »
i've got opel-scanner to work fine on my Calibra c20let using EDS Phase2 chips. You do need the ECU in a certain mode, ie either powered on but engine off or powered on with engine running - I can't remember the combination otherwise.
There was known problem but that got fixed after 2.0.1.29
http://www.vauxhalltrader.co.uk/blog/archives/04-2014