Welcome Guest. Please login or register.

Recent Posts

Pages: 1 ... 8 9 [10]
91
OpelScannerCANPRO / Logging off IPC
« Last post by krupers on May 19, 2023, 15:49:23 »
Hello,
I have a used IPC from Insignia and wanted to install on my Astra K.
I asked Opel Authorized Service for help, but because old IPC has not ben logged off, I can not do anything to program that IPC to my Opel.

Can I use Opel Scanner and how to do it to reset all the old IPC and succesfully program with SPS?
On defaults Opel does not allow me to do that.

Thank you for the info and support!
92
ScanMyOpel Android app / Re: Incompatible ELM interface!
« Last post by duayres on May 05, 2023, 14:43:49 »
I bought a new dongle which is allegedly v1.5, but it wont work, tried with corsa-c from 2006 to 2008 (my corsa C is the 2008 version) but it doesn't work!


I've attached the log file, please consider only the tests by day 5 of May (today)
93
OpelScannerCAN / Re: Opel Corsa D 2008 ESP C0551
« Last post by Vadson on April 23, 2023, 07:29:43 »
У меня так не получилось. Я имею в виду именно установку блока от машины без ESP на машину, где имеется ESP.  Если ставить без изменений в еепром блока, то ошибка неизбежна.  Пробовал программировать и блок АБС, и блок управления двигателя, менять кодировки. Увы нет.
То же самое, что пытаться ставить блоки AY на изитроник вместо AX. Впрочем и это тоже я уже умею делать.

It didn't work out that way for me. I mean exactly the installation of the unit from a machine without ESP to a machine where there is an ESP. If you put it unchanged in the eeprom of the block, then an error is inevitable. I tried programming both the ABS unit and the engine control unit, changing the encodings. Alas, no.
The same as trying to put AY blocks on izitronic instead of AX. However, I already know how to do this too.
94
OpelScannerCAN / Re: Opel Corsa D 2008 ESP C0551
« Last post by fanopel930 on April 23, 2023, 03:55:50 »
I've fixed already 2 cars with issue, by simply SPS the ABS/ESP unit, with globaltis 32. It was literally 2 minutes work, it took more to start the laptop. If I ever have this situation again, I will video record.
95
OpelScannerCAN / Re: Opel Corsa D 2008 ESP C0551
« Last post by Vadson on April 17, 2023, 14:56:55 »
No, replacing the ABS unit will not help. I have already managed to study this problem and find a solution. Differences in the engine control unit's eeprom. Nothing helps except the forced recording of an eeprom from a machine of the desired configuration or a native eeprom. Neither PS nor flash recording will help, only eeprom. The issue is solved using IOterminal.

Нет, замена блока АБС не поможет. Я уже успел изучить эту проблему и найти решение.
Отличия в еепром блока управления двигателем. Не помогает ничего, кроме принудительной записи еепром от машины нужной комплектации или родного еепром.
Не поможет ни SPS, ни запись флеш, только еепром.
Вопрос решается с помощью IOterminal.
96
OpelScannerCAN / Re: Opel Corsa D 2008 ESP C0551
« Last post by fanopel930 on April 17, 2023, 12:56:52 »
Solution to this is to SPS the ABS unit. Error will go away directly.
97
OpelScannerCAN / Re: BlueTooth support
« Last post by fanopel930 on April 17, 2023, 12:54:51 »
I tried back in the day but could not get it going.
98
день добрый не могу понять где скачать прошивку.нет ссылки. спасибо
99
Обновление DFOX: добавлен новый OBD драйвер для работы с ЭБУ BOSCH MD1CS069, устанавливаемыми на тракторы Massey Ferguson.

Подробнее на сайте:  https://ecutools.ru/publications/dfox-update-22032023/

Телефон: 8 (800) 550-09-58 (только по вопросам поставки и оплаты, консультации по техническим вопросам ведем по e-mail).
Время работы: с 10 до 19 часов по московскому времени (GMT +4) c понедельника по пятницу.

#DFOX #tool #software #тюнинг #чиптюнинг #оборудование #обновление #ECUTools
100
Обновление Flex, версия 6.23.0.0: добавлена поддержка работы в режиме BOOT с ЭБУ EVPT VCU3000, устанавливаемыми на автомобили Citroën Ami.

Подробнее на сайте:  https://ecutools.ru/publications/flex-update-22-03-2023/

Телефон: 8 (800) 550-09-58 (только по вопросам поставки и оплаты, консультации по техническим вопросам ведем по e-mail).
Время работы: с 10 до 19 часов по московскому времени (GMT +4) c понедельника по пятницу.

#FLEX #tool #software #тюнинг #чиптюнинг #оборудование #обновление #ECUTools

Pages: 1 ... 8 9 [10]