Welcome Guest. Please login or register.
« previous next »
Pages: [1]   Go Down

Author Topic: Corsa Hall Sensor  (Read 10760 times)

0 Members and 1 Guest are viewing this topic.

Offline auto_prof

  • Full Member
  • ***
  • Posts: 79
Corsa Hall Sensor
« on: July 21, 2012, 20:57:27 »
Hi All,
I have a corsa X1.0XE and do not start i scanned it and found P0340 Hall Sensor High Voltage all parameters else is OK.
I changed Crank,Cam Sensor ECU and it is the same,any ideas .
Thanks
Logged

Offline Treig

  • AdvancedUser
  • ***
  • Posts: 791
Re: Corsa Hall Sensor
« Reply #1 on: July 22, 2012, 05:49:40 »
Try without cam sensor.
Logged

Offline auto_prof

  • Full Member
  • ***
  • Posts: 79
Re: Corsa Hall Sensor
« Reply #2 on: July 22, 2012, 06:16:12 »
It is the same!!
Logged

Offline Treig

  • AdvancedUser
  • ***
  • Posts: 791
Re: Corsa Hall Sensor
« Reply #3 on: July 22, 2012, 14:37:18 »
compression? do you check it?
Logged

Offline auto_prof

  • Full Member
  • ***
  • Posts: 79
Re: Corsa Hall Sensor
« Reply #4 on: July 23, 2012, 14:58:53 »
OK,i found a cut in  wire in the cam sensor, the fault never came ,but didn't start again.
i found that the fuel  return valve is bad and didn't made a pressure in the injectors pipe
Thanks for help and support     
Logged
Pages: [1]   Go Up
« previous next »