OpelScanner
ScanMyOpel => ScanMyOpel Android app => Topic started by: Artur on November 14, 2013, 08:11:38
-
Here will be posted new versions and feedbacks from betatesters.
-
Astra H my-2006.
Works great. (Engine,Abs,Cim)
-
Hi,
Thanks a lot. Can you send me logs?
What about AT? No AT or failled to connect?
Can you help me to translate app (s) in Finnish?
Thanks,
Artur
-
I send logs with email.
No AT in this car.
I can help with translate.
-
Did you get my logs?
-
Yes, I got them, thanks. Soon will come up with new version and files for translation.
-
Vectra C -07 Z28NET
Engine,ok
At,no at in this car
Abs,id parsing failed
Eps,id parsing failed
Cim,ok
No logs sorry (was disabled) :P
-
Где можно скачать приложение?
-
Here will be posted new versions and feedbacks from betatesters.
Hello Admin,
I tried to use the app, but at the very first screen I can not pair with BT OBD device. It says I can specify it at SETUP, but there is no SETUP button. I use androis phone Jelly Bean OP, 4.1.1.
What is the solution?
Regards,
Zoltan
PS: I posted it at Google Groups too.
-
The Setup button is the one, you use is global phone setup.
-
The Setup button is the one, you use is global phone setup.
Hi,
of course I paired with ELM327 1.5 before. For example TORQUE pairs immediately with it. What else "setuping" do I need with the software?
Zoltan
-
Hi, I am still suffering from the unsuccessful starting.
Did anybody have such a starting problem?
What I did:
I started Torque, what is automatically pairs with ELM 327.
After I started ScanMyOpelCAN app.
So theoretically my phone is connected with ELM327.
But I can not do anything.
CONNECT button is still red.
-
You need to select the BT interface in the software.
-
Dear Artur,
as I am not an IT expert, can you pay 2 minutes attention explaining me what should I do?
Where can I select this BT interface at the software? I can not click anywhere on the start screen, I can only select the type of car, engine etc. An I can "Connect", but as I wrote, it is red, so I can not click on it.
I would be test your smart software but I face difficilities, please help!
Regards,
Zoltan
-
Zoltan,
Show me the screenshot of the app.
-
Hi Artur,
I try to attach here
-
Do you have something like settings Button?
-
No other buttons displayed on the screen.
Where should it be ideally?
I have a standard Android phone, nothing extraordinary on hardware side.
-
Check your phone's manual where is the menu-button.
-
Ok, I did checked by myself, I quite well know my phone.
The ELM327 was paired by he Bluetooth settings.
As I mentioned, Torque is running smooth with ELM327.
Let us see the necessary steps 1 by 1:
1.) I downloaded your app.
2.) BT is paired with ELM327, BT is on.
3.) I click your App on the screen.
4.) I received the uploaded screen, I can choose the type of the car etc.
5.) The "CONNECT" button is RED on the screen.
6.) ??? What am I doing wrong ??? What is the next step??
-
Next step is click your phone's menu-button.
-
Roger Sir! :)
And then...?
-
At the bottom of the phone's display should open menu where you can choose:
-bluetooth
-enable logging
-about
-
Actually, on some Android versions the Settings button can be missing.
-
What on earth man can do then?
-
Make explicit Settings button, as it was done in ScanMyOpel recently.
-
Actually, on some Android versions the Settings button can be missing.
Maybe my phone is "some phone" than...
OK, it is a beta test version, the final version will correct this mistake?
-
Make explicit Settings button, as it was done in ScanMyOpel recently.
So the "settings" is missing now, as it was missed at ScanMyOpel previously.
And you upgraded it, so there is now the "settings" button.
Will you make it by the Beta version or only the final version will upgraded?
-
Make explicit Settings button, as it was done in ScanMyOpel recently.
So the "settings" is missing now, as it was missed at ScanMyOpel previously.
And you upgraded it, so there is now the "settings" button.
Will you make it by the Beta version or only the final version will upgraded?
So the "settings" is missing now, as it was missed at ScanMyOpel previously.
And you upgraded it, so there is now the "settings" button.
Will you make it by the Beta version or only the final version will upgraded?
-
Hi, the app works fine with my 2006 Opel Astra H, and 2008 Astra H Facelift, but with my 2006 Opel Combo/Corsa C no comunication with ECU any help ?
I can help with translation in Romanian if you need.
-
Hi,
For Corsa C you can use our ScanMyOpel app, which is available on the Google Play Market.
Can you send me logs of Astra H communication?
-
Добрый день, имею адаптер ELM327 mini BT и автомобиль Opel Astra H 1.9TDI 100HP 2007г.в. Могули я получить программу для тестирования? могу отправлять логи работы программы
-
Зарегистрируйтесь в группе google. Подробности в описании к программе ScanMyOpelLite.
-
здравствуйте,тоже интересует вопрос по программе ScanMyOpelCAN.чтобы диагностировать зафира б 1.9DTH AT.
-
Все никак не можем выпустить новый апп для диагностики моделей с CAN шиной.
Надеюсь, скоро будет.
-
Ждём,машин с CAN много.
-
Hi,
Is it possible to do some beta testing for you guys?
t: surmis
-
Hi.
Will there be support for wifi android?
iCar3 by Vgate - OBD Scanner Wifi.
-
Все никак не можем выпустить новый апп для диагностики моделей с CAN шиной.
Надеюсь, скоро будет.
Как скоро?
-
Последние тесты проходит.
-
Последние тесты проходит.
Очень ждем!
-
Yes
after today's update egine X16LET is available for diagnostic :)
Thanks