Welcome Guest. Please login or register.

Author Topic: Troubles any scanner cannot see  (Read 5763 times)

0 Members and 1 Guest are viewing this topic.

Offline elvinfrits

  • Newbie
  • *
  • Posts: 4
Troubles any scanner cannot see
« on: February 24, 2008, 16:15:57 »
Anyone know the problem opelscanner or any other scanner cannot see.
BlackDirt in the inlet.
I had opelscanner test it but It cannot find any faultcodes.
the symptems :
on stationary level the RPM goes down below 500
and again up to 800 RPM.
So it was not stable. And after a while the motor stops.
I put the scanner to look for some fault codes. and ther was non.
I look on site like ATm and discover the weakness .
The opel (my zafira 1,8 benzine) has as all other the problem EGR?
It make dirt (slug) and by claening is it statonairy becomes stable again.
It seems this  problem will returns. So not always the system detect faultcodes.